Drip edge installation
The metal at the roof edge
Flashing is what seals every junction on a roof — walls, chimneys, valleys, penetrations — and it is where most leaks begin. It fails through corrosion, through movement opening the joint it was set into, and through having been installed as a surface detail rather than stepped properly into the courses. Replacing it means working into the surrounding material rather than sealing over the top, which is why it costs more than a patch and why it lasts.
Chattooga County sits in the Blue Ridge foothills, which puts it in a different roofing climate from most of Georgia. The mountains get real freeze-thaw cycling: water works into a hairline gap in flashing during the day, freezes overnight, expands, and opens the gap a little wider. Repeat that through a Chattooga County winter and a joint that was watertight in October is leaking by March. Ice at the eaves is the other one — meltwater running down a warm roof refreezes over the cold overhang and backs up under the shingle course, which is how water ends up inside a roof with no visible damage at all. Steep pitches shed snow well but make access harder, and older stock here runs to standing-seam and pressed metal, which fails at the fastener rather than the panel.
It is thinner material in the most exposed position, and it sits across a joint between two things that move at different rates. On most roofs the flashing is the first component to need attention, often by a decade.
Yes. It means lifting and reinstating the surrounding courses, but it is a localised job on an otherwise sound roof and far cheaper than replacement.
The metal at the roof edge
Concrete and clay tile
Bruising and granule loss
Algae streaking and moss growth
Lifting panels for roof work
Replacing a failed roof window
You will get a straight answer on whether Chattooga County needs someone out today or whether it can wait — before anyone quotes you for anything.
Call (706) 696-1888